Setting up Volta Wireless SIM Card (iOS)

ios 01

Step 1

First, insert the SIM card into the device.

Step 2

Go to Settings

Select Cellular

ios 02
ios 03
ios 10

Step 3

Activate Cellular Data

Then Tap Cellular Data Options

Step 4

Activate Data Roaming

Then tap Voice & Data

ios 05
ios 06
ios 07

Step 5

Choose 5G On or 5G Auto, depending on how concerned you are about battery life.

Step 6

Go back to Cellular Data Options

Tap Data Mode

Select Allow More Data on 5G

ios 06
ios 08
ios 10
ios 09

Step 7

Go back to Cellular

Tap Network Selection

Make sure Automatic is Activated

Step 8

Go back to Cellular

Tap Cellular Data Network

ios 04

Before

ios 11

After

Picture1

Step 9

Change the Cellular Data APN to tn1

Change the LTE Setup APN to tn1

Be sure to delete all other information in these two sections.

There should be no username or password entered in either of these sections.

Step 10

To use your device as a personal hotspot

Set the Personal HotSpot APN  to tn1

Be sure to delete all other information in this Personal HotSpot section.

There should be no username or password.

Do not change anything else in this screen.

ios 13
ios 02

Step 11

To test the connection to the mobile network,

Deactivate WiFi (if it has been activated)

Step 12

At the top right of the screen,

Signal strength should be visible

And you should see 5G, 4G+, 4G or LTE

If you see the letter ‘R’ or ‘r’,

please ignore it.

ios 02
ios 02

Step 13

If at the top right of the screen,

Signal strength is not visible or is very low,

Or if you see 3G,

Most likely your device has not yet updated its connection settings.

Please turn the device off for 60 seconds

And then turn it back on again.

This will cause the device to re-register on the networks, and you should see 5G, 4G, or LTE appear.

Step 14

Finally, you may test that connectivity

Is working well by opening a browser and

Going to your favorite webpage

If the site loads quickly, then your

Volta Wireless SIM card is working correctly.

ios 14